You are here: Home > Drills > Auto Feed Drills and Tappers > Ingersoll Rand Self Feed Drills
Select A Sub Category:
Lead Screw Tappers Bant-A-Matic Self Feed Drills
Series 34 Self Feed Drills Series 54 Self Feed Drills
Series 74 Self Feed Drills

Ingersoll Rand Self Feed Production Drills

IR Ingersoll Rand Self Feed Production Drills

 

  - Air and Electric Drills Available - Lead Screw Tappers
  - Multi-Spindle Heads - Offset Drills
  - Tappers and Tapping Heads - Custom Drill Configurations
  - Desoutter Drills - Ingersoll Rand Drills
  - Fully Engineered Solutions - Expert Drilling Engineers

 

Call us at 1-800-353-4676 for free selection and engineering assistance

Sort By:
1
IR Ingersoll Rand Series 34 Electric and Pneumatic Self Feed Drills 0.33 H.P. ( .25 kW )
IR Ingersoll Rand Series 34 Electric / Pneumatic Self Feed Drills 0.33 H.P. ( .25 kW )
Please call us at 1-800-353-4676 for pricing, availability, or to order.

  • A precision spindle with pre-loaded bearing support for accurate targeting, longevity, and .001 t.i.r. runout, or less.
  • Built-in dwell control that holds repeatable depth within .002 inches.
  • Individually adjustable feed rate control for advance and retract.
  • The longest usable tool stroke length (adjustable to 110 mm [4.33 inches]) available in such a compact tool.
  • Variable thrust from 150 to 330 lbs. for proper penetration power and rate.
  • A heavy duty, ball-bearing supported drive train that is fully sealed and prelubed.
  • Air and electric I/Os for control and feedback.
  • IR Ingersoll Rand Series 54 Electric / Pneumatic Self Feed Drills 0.50 H.P. ( .37 kW )
    Please call us at 1-800-353-4676 for pricing, availability, or to order.

    • A precision spindle with pre-loaded bearing support for accurate targeting, longevity, and .001 t.i.r. runout, or less.
    • Built-in dwell control that holds repeatable depth within .002 inches.
    • Individually adjustable feed rate control for advance and retract.
    • The longest usable tool stroke length (adjustable to 110 mm [4.33 inches]) available in such a compact tool.
    • Variable thrust from 150 to 330 lbs. for proper penetration power and rate.
    • A heavy duty, ball-bearing supported drive train that is fully sealed and prelubed.
    • Air and electric I/Os for control and feedback.
    IR Ingersoll Rand Series 74 Electric / Pneumatic Self Feed Drills 0.75 H.P. ( .56kW )
    IR Ingersoll Rand Series 74 Electric / Pneumatic Self Feed Drills 0.75 H.P. ( .56kW )
    Please call us at 1-800-353-4676 for pricing, availability, or to order.

    • A precision spindle with pre-loaded bearing support for accurate targeting, longevity, and .001 t.i.r. runout, or less.
    • Built-in dwell control that holds repeatable depth within .002 inches.
    • Individually adjustable feed rate control for advance and retract.
    • The longest usable tool stroke length (adjustable to 110 mm [4.33 inches]) available in such a compact tool.
    • Variable thrust from 150 to 330 lbs. for proper penetration power and rate.
    • A heavy duty, ball-bearing supported drive train that is fully sealed and prelubed.
    • Air and electric I/Os for control and feedback.
    IR Ingersoll Rand 2200 Series Lead Screw Tapper 1/2" .62 HP (.47 kW)
    IR Ingersoll Rand 2200 Series Lead Screw Tapper 1/2" .62 HP (.47 kW)
    Please call us at 1-800-353-4676 for pricing, availability, or to order.

    The ARO Lead Screw Tapper is designed for precision hole tapping in medium and high-production machining applications. The tool is air operated and is fully automatic, with a built-in pressure-operated valve, manual controls and remote control ports for starting and retracting. Installation is easy, with only simple pneumatic circuitry required. It can be used individually or in conjunction with other pneumatic and electric self-feed tools and maching components.
    IR Ingersoll Rand Par-A-Matic Series Peck Feed Drill .50 HP (.37 kW)
    IR Ingersoll Rand Par-A-Matic Series Peck Feed Drill .50 HP (.37 kW)
    Please call us at 1-800-353-4676 for pricing, availability, or to order.

    The ARO Peck-Feed Drill is a complete, self-contained unit. The pecking operation is controlled by a pre-set, timed sequence. Upon receiving a start signal, the tool automatically advances, drills to a selected peck depth and retracts, continuing the cycle until the total hole depth is reached. This sequential pecking action clears the hole and drill flutes of chips that produce frictional heat, drag, and drill skew. It also greatly increases the life of small drills (3/32 thru No. 80) that are sensitive to excessive thrust and radial loading.
    IR Ingersoll Rand Bant-A-Matic Series Self Feed Drills .25 HP (.20 kW)
    IR Ingersoll Rand Bant-A-Matic Series Self Feed Drills .25 HP (.20 kW)
    Please call us at 1-800-353-4676 for pricing, availability, or to order.

    Built-in four-way valve enables both manual and remote operation.
    Double-acting air piston provides smooth, controlled forward and retract strokes.
    Needle valve controls allows adjustment of forward and retract strokes.
    Adjustment screw provides infinite stroke length settings.
    Ball bearing spindle support offers precision and long service life.
    Muffled exhaust for a quieter work environment.<
    IR Ingersoll Rand Par-A-Matic Series Self Feed Drills .50 HP (.37kW)
    IR Ingersoll Rand Par-A-Matic Series Self Feed Drills .50 HP (.37kW)
    Please call us at 1-800-353-4676 for pricing, availability, or to order.

    Built-in four-way valve enables both namual and remote operation.
    Double-acting air piston provides smooth, controlled forward and retract strokes.
    Needle valve controls allows adjustment of forward and retract strokes.
    Adjustment screw provides infinite stroke length settings.
    Ball bearing spindle support offers precision and long service life.
    Muffled exhaust for a quieter work environment.
    IR Ingersoll Rand Super Par-A-Matic Series Self Feed Drills .75 HP (.56 kW)
    IR Ingersoll Rand Super Par-A-Matic Series Self Feed Drills .75 HP (.56 kW)
    Please call us at 1-800-353-4676 for pricing, availability, or to order.

    Built-in four-way valve enables both namual and remote operation.
    Double-acting air piston provides smooth, controlled forward and retract strokes.
    Needle valve controls allows adjustment of forward and retract strokes.
    Adjustment screw provides infinite stroke length settings.
    Ball bearing spindle support offers precision and long service life.
    Muffled exhaust for a quieter work environment.
    IR Ingersoll Rand High-Thrust 8670 Series Self Feed Drills 1.25 HP (.93 kW)
    IR Ingersoll Rand High-Thrust 8670 Series Self Feed Drills 1.25 HP (.93 kW)
    Please call us at 1-800-353-4676 for pricing, availability, or to order.

    ARO Hi-Thrust Automatic Feed Drills are designed for increased material removal rates of standard alloys and non-ferrous materials. Their high power and thrust also enable the machining of even the most demanding materials, including titanium and high-nickel alloys. ARO Hi-Thrust Drills feature a dual piston which develops the increased thrust for fast penetration and reduced cycle times. The tools are fully automatic, with all cycle and motor functions regulated by a single control module. They are easily installed, requiring only simple pneumatic circuity. Hi-Thrust Drills can also be used in conjunction with other pneumatic and electric ARO Automatic Production tools.
    IR Ingersoll Rand Par-A-Matic Offset Self Feed Drills .50 HP (.37 kW)
    IR Ingersoll Rand Par-A-Matic Offset Self Feed Drills .50 HP (.37 kW)
    Please call us at 1-800-353-4676 for pricing, availability, or to order.

    ARO Automatic Offset Drills are offered to accommodate unusual part or fixture configurations. They also may be grouped in a fixture to produce holes with a center-line distance as low as 1.5".

    Offset drills are easily installed, requiring only simple pneumatic circuitry. They may also be used in conjunction with other pneumatic or electric ARO Automatic Production Tools.
    Desoutter / Ingersoll Rand Based Automatic Feed Drilling Benchtop System
    Benchtop Automatic Feed Drilling System with Ingersoll Rand or Chicago Pneumatic Feed Drills
    Please call us at 1-800-353-4676 for pricing, availability, or to order.

    • Ingersoll Rand or Chicago Pneumatic Feed Drills available
    • Single or Multiple drill units available
    • Multi spindle drilling or tapping heads available
    • Suitable for metal, wood, particle board, or plastic
    • Very low noise levels
    • Self contained air control circuitry
    • Palm button operated cycle
    • Pneumatic or Electric drill(s)
    • Your choice of speed(s)
    • Sturdy mounting stand with baseplate
    • Solid or swivel mount clamping systems available 
       
     
    1
    The Ingersoll Rand line of fixtured automatic feed drills provide the solution when accurate and repeatable hole-drilling is required. Choose the configuration you need to deliver results time after time.

    Bant-A-Matic, Par-A-Matic, and Super Par-A-Matic Drills provide the selection, performance, and degree of precision to automate a wide range of secondary machining applications simply and economically. They utilize compressed air for both the spindle rotation and feed / control functions. The reliable rotary-vane air motor offers high power-to-size performance which minimizes tool size and weight for added machine design flexibility. The tools are easily installed, requiring only simple pneumatic circuitry. They can be used individually or in conjunction with other ARO electric and pneumatic tools.

    The Series 34, 54 and 74 models are highly flexible and extremely versatile, offering simple design innovations that put them ahead of other products in their class:

    • An extensive selection of tapping heads, drill chucks, and collets that can be interchanged as applications demand.
    • 20 spindle speeds for optimum performance, driven by an easy-to-access pulley system that can be changed quickly and easily to accommodate new diameters or materials.
    • Compact size (24 inches) and modest weight (30 Ibs.) for flexibility in use and mounting, allowing a maximum number of simultaneous secondary operations.
    • A simple, customer-driven design that includes fewer parts than competitive tools - with less frequent, lower-cost maintenance.
    • A central module for three remote control options - electronic (24V DC), electric (115V AC), and pneumatic allows for easier machine diagnostics.
    • Standard frame motors with dual voltage capabilities (230/460V AC).