Home > Aircraft Maintanence >

IR Ingersoll Rand Par-A-Matic Series Peck Feed Drill .50 HP (.37 kW)

IR Ingersoll Rand Par-A-Matic Series Peck Feed Drill .50 HP (.37 kW)


 

Product Code: IRPAMPF
Please call us at 1-800-353-4676 for pricing, availability, or to order.

SPECIFICATIONS
 

ARO Peck-Feed Drills are designed specifically for applications where the hole depth exceeds four times the diameter of the drill bit. They offer the advantages of deep-hole chip clearance with close diameter and axial controls.

The ARO Peck-Feed Drill is a complete, self-contained unit. The pecking operation is controlled by a pre-set, timed sequence. Upon receiving a start signal, the tool automatically advances, drills to a selected peck depth and retracts, continuing the cycle until the total hole depth is reached. This sequential pecking action clears the hole and drill flutes of chips that produce frictional heat, drag, and drill skew. It also greatly increases the life of small drills (3/32 thru No. 80) that are sensitive to excessive thrust and radial loading.

  • Manual and remote operation.
  • Muffled exhaust for a more comfortable work environment.
  • Selection of mounting brackets to meet installation requirements.

 


Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Aircraft Maintanence
Drills > Auto Feed Drills and Tappers > Ingersoll Rand Self Feed Drills
Drills > Auto Feed Drills and Tappers