|
|
|
|
|
|
Ingersoll Rand 2135PTiMAX 1/2 inch Industrial Duty Impact Wrench Pin-Type 50-550 ft lbs
|
|
|
The 2135PTi set the standard for performance with the best power to weight ratio on the market in its class. The new 2135PTiMAX raises the bar with 780 ft. lbs still at only 3.95 lbs. The new design includes enhanced controls for even greater comfort and convenience. We’re so confident with the durability of this tool that we are backing it up with a 2 year warranty at no additional cost. The 2135PTiMAX also features a pin-type anvil.
|
|
|
|
|
|
|
|
|
|
IR Ingersoll Rand Series 34 Electric / Pneumatic Self Feed Drills 0.33 H.P. ( .25 kW )
|
|
call us for your low price
|
|
|
| A precision spindle with pre-loaded bearing support for accurate targeting, longevity, and .001 t.i.r. runout, or less.
Built-in dwell control that holds repeatable depth within .002 inches.
Individually adjustable feed rate control for advance and retract.
The longest usable tool stroke length (adjustable to 110 mm [4.33 inches]) available in such a compact tool.
Variable thrust from 150 to 330 lbs. for proper penetration power and rate.
A heavy duty, ball-bearing supported drive train that is fully sealed and prelubed.
Air and electric I/Os for control and feedback. |
|
|
|
|
|
|
|
|
|
|
|
IR Ingersoll Rand Series 54 Electric / Pneumatic Self Feed Drills 0.50 H.P. ( .37 kW )
|
|
call us for your low price
|
|
|
- A precision spindle with pre-loaded bearing support for accurate targeting, longevity, and .001 t.i.r. runout, or less.
- Built-in dwell control that holds repeatable depth within .002 inches.
- Individually adjustable feed rate control for advance and retract.
- The longest usable tool stroke length (adjustable to 110 mm [4.33 inches]) available in such a compact tool.
- Variable thrust from 150 to 330 lbs. for proper penetration power and rate.
- A heavy duty, ball-bearing supported drive train that is fully sealed and prelubed.
- Air and electric I/Os for control and feedback.
|
|
|
|
|
|
|
|
|
|
|
IR Ingersoll Rand Series 74 Electric / Pneumatic Self Feed Drills 0.75 H.P. ( .56kW )
|
|
call us for your low price
|
|
|
- A precision spindle with pre-loaded bearing support for accurate targeting, longevity, and .001 t.i.r. runout, or less.
- Built-in dwell control that holds repeatable depth within .002 inches.
- Individually adjustable feed rate control for advance and retract.
- The longest usable tool stroke length (adjustable to 110 mm [4.33 inches]) available in such a compact tool.
- Variable thrust from 150 to 330 lbs. for proper penetration power and rate.
- A heavy duty, ball-bearing supported drive train that is fully sealed and prelubed.
- Air and electric I/Os for control and feedback.
|
|
|
|
|
|
|
|
|
|
|
IR Ingersoll Rand 2200 Series Lead Screw Tapper 1/2" .62 HP (.47 kW)
|
|
call us for your low price
|
|
|
The ARO Lead Screw Tapper is designed for precision hole tapping in medium and high-production machining applications. The tool is air operated and is fully automatic, with a built-in pressure-operated valve, manual controls and remote control ports for starting and retracting. Installation is easy, with only simple pneumatic circuitry required. It can be used individually or in conjunction with other pneumatic and electric self-feed tools and maching components.
|
|
|
|
|
|
|
|
|
|
IR Ingersoll Rand Par-A-Matic Series Peck Feed Drill .50 HP (.37 kW)
|
|
call us for your low price
|
|
|
The ARO Peck-Feed Drill is a complete, self-contained unit. The pecking operation is controlled by a pre-set, timed sequence. Upon receiving a start signal, the tool automatically advances, drills to a selected peck depth and retracts, continuing the cycle until the total hole depth is reached. This sequential pecking action clears the hole and drill flutes of chips that produce frictional heat, drag, and drill skew. It also greatly increases the life of small drills (3/32 thru No. 80) that are sensitive to excessive thrust and radial loading.
|
|
|
|
|
|
|
|
|
|
IR Ingersoll Rand Bant-A-Matic Series Self Feed Drills .25 HP (.20 kW)
|
|
call us for your low price
|
|
|
Built-in four-way valve enables both manual and remote operation.
Double-acting air piston provides smooth, controlled forward and retract strokes.
Needle valve controls allows adjustment of forward and retract strokes.
Adjustment screw provides infinite stroke length settings.
Ball bearing spindle support offers precision and long service life.
Muffled exhaust for a quieter work environment.<
|
|
|
|
|
|
|
|
|
|
IR Ingersoll Rand Par-A-Matic Series Self Feed Drills .50 HP (.37kW)
|
|
call us for your low price
|
|
|
Built-in four-way valve enables both namual and remote operation.
Double-acting air piston provides smooth, controlled forward and retract strokes.
Needle valve controls allows adjustment of forward and retract strokes.
Adjustment screw provides infinite stroke length settings.
Ball bearing spindle support offers precision and long service life.
Muffled exhaust for a quieter work environment.
|
|
|
|
|
|
|
|
|
|
IR Ingersoll Rand Super Par-A-Matic Series Self Feed Drills .75 HP (.56 kW)
|
|
call us for your low price
|
|
|
Built-in four-way valve enables both namual and remote operation.
Double-acting air piston provides smooth, controlled forward and retract strokes.
Needle valve controls allows adjustment of forward and retract strokes.
Adjustment screw provides infinite stroke length settings.
Ball bearing spindle support offers precision and long service life.
Muffled exhaust for a quieter work environment.
|
|
|
|
|
|
|
|
|
|
IR Ingersoll Rand High-Thrust 8670 Series Self Feed Drills 1.25 HP (.93 kW)
|
|
call us for your low price
|
|
|
ARO Hi-Thrust Automatic Feed Drills are designed for increased material removal rates of standard alloys and non-ferrous materials. Their high power and thrust also enable the machining of even the most demanding materials, including titanium and high-nickel alloys. ARO Hi-Thrust Drills feature a dual piston which develops the increased thrust for fast penetration and reduced cycle times. The tools are fully automatic, with all cycle and motor functions regulated by a single control module. They are easily installed, requiring only simple pneumatic circuity. Hi-Thrust Drills can also be used in conjunction with other pneumatic and electric ARO Automatic Production tools.
|
|
|
|
|
|
|
|
|
|
IR Ingersoll Rand Par-A-Matic Offset Self Feed Drills .50 HP (.37 kW)
|
|
call us for your low price
|
|
|
ARO Automatic Offset Drills are offered to accommodate unusual part or fixture configurations. They also may be grouped in a fixture to produce holes with a center-line distance as low as 1.5".
Offset drills are easily installed, requiring only simple pneumatic circuitry. They may also be used in conjunction with other pneumatic or electric ARO Automatic Production Tools.
|
|
|
|
|
|
|
|
|
|
IR Ingersoll Rand IC1G - IC2G Insight Graphics DC Controller
|
|
|
The Insight ICG Series of controllers were designed to make it easier for assembly operations to reach the level of quality required for their product. The easy to read color VGA screen, user friendly navigation and programming, tool self identifier and complete library of "Help Screen", makes setting up the controller a simple task. With its complete set of I/O, RS232 port, fieldbus, and parallel port, communication to other devices such as PLCs and networks is possible. Multiple torquing strategies, statistical calculations, gang count and storage of 50,000 EOR values are just a few of the additional features of this controller. Available in single (IC1G) or two (IC2G) spindle versions and combined with the QE and QM series of tools, the ICG controllers are your answer to all your critical fastening requirements.
|
|
|
|
|
|
|
|
|
|
IR Ingersoll Rand IC1D Insight Display DC Controller
|
|
|
The IC1D Series of controllers give you full closed loop-control in an industry leading compact size. With features like 1/4 VGA color display and intuitive programming interface, the IC1D units provide unmatched performance and value. These controllers have full communication capability using Ethernet, RS232, Fieldbus or standard I/O. Units may be programmed either through the key pad or via a PC running ICS software. IC1D Controllers will self identify and operate all QE and QM Series of tools making set-up and operation an easy task.
|
|
|
|
|
|
|
|
|
|
IR Ingersoll Rand IC1M Insight Modular DC Controller
|
|
|
The IC1M Series of controllers give you full closed loop-control in an industry leading compact size. With standard features like multiple torque strategies, digital display and Parameter Transfer Key, the IC1M units provide unmatched performance and value. These controllers have full communication capability using Ethernet, RS232, Fieldbus or standard I/O. Units may be programmed either with the Parameter transfer Key or via a PC running ICS software. A 0 to 60 degree C (32 to 140 F) internal operating range allow these units to be used in the most demanding conditions without risk of overheating. IC1D Controllers will self identify and operate all QE and QM Series of tools making set-up and operation an easy task.
|
|
|
|
|
|
|
|
|
|
IR Ingersoll Rand PD Series DC Controller
|
|
|
The PD Series of controllers is used to drive the DE Series of tools. This product has been replaced for all new installations by the IC Series of controllers and QE/QM Series of tools. It is currently still available for customers with installations of PFS or PD controllers.
|
|
|
|
